* fix alignment exception for ullPortInterruptNesting.
While loading (LDR X5, ullPortInterruptNestingConst) the ullPortInterruptNesting
variable, the program control seems to be stuck and there is no abort or stack
trace observed (as there is no exception handler is installed to catch unaligned
access exception).
Program control moves forward, if one just declares this varible to be 2 bytes
aligned but then varible is not updated properly.
One of my colleague, pointed out that issue is due to the fact that
ullPortInterruptNesting must be at 8 bytes aligned address but since
"vApplicationIRQHandler" (that has 4 bytes of address) is sitting between
two 8 bytes aligned addresses that forces ullPortInterruptNesting to be at
4 byte aligned address, causing all sort of mess.
It works on QEMU (on ARM64) as it is, since there is no such check for
unaligned access but on real hardware it is prohibited.
Workaround to this problem is, either we skip 4 byets (using .align 4) after
vApplicationIRQHandler declaration or declare it the end of all declarations.
This commit does the latter one.
Signed-off-by: Amit Singh Tomar <atomar25opensource@gmail.com>
* Update portASM.S
Remove 1 tab = 4 spaces
Co-authored-by: Amit Singh Tomar <atomar25opensource@gmail.com>
Co-authored-by: alfred gedeon <28123637+alfred2g@users.noreply.github.com>
Co-authored-by: Joseph Julicher <jjulicher@mac.com>
This commit introduces a new config
configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS which enables developers to
prevent critical sections from unprivileged tasks. It defaults to 1 for
backward compatibility. Application should set it to 0 to disable
critical sections from unprivileged tasks.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Mention that FreeRTOS_IRQ_Handler should not be used for FIQs and the
reason for assuming Group 1 for Interrupt Acknowledge and End Of
Interrupt registers.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Let the FreeRTOS IRQ handler properly store and restore the ICCIAR
register value around the vApplicationIRQHandler() call.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Co-authored-by: Stephane Viau <stephane.viau@oss.nxp.com>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
The secure side context management code now checks that the secure
context being saved or restored belongs to the task being switched-out
or switched-in respectively.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
This commit improves ARMv8-M security by pre-allocating secure-side task
context structures and changing how tasks reference a secure-side
context structure when calling a secure function. The new configuration
constant secureconfigMAX_SECURE_CONTEXTS sets the number of secure
context structures to pre-allocate. secureconfigMAX_SECURE_CONTEXTS
defaults to 8 if left undefined.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* Use cast to fix warnings.
* Remove all empty definitions of portCLEAN_UP_TCB( pxTCB ) and
portALLOCATE_SECURE_CONTEXT( ulSecureStackSize ) from ports.
When these are undefined, the default empty definition is defined
in FreeRTOS.h.
The difference between this port and portable/GCC/ARM_CA53_64_BIT is
that this port uses System Register interface to access CPU interface
while the other one uses Memory-mapped interface.
Signed-off-by: Gaurav Aggarwal
Co-authored-by: Cobus van Eeden <35851496+cobusve@users.noreply.github.com>
* Adjust portPOINTER_SIZE_TYPE to correct size
portPOINTER_SIZE_TYPE wasn't yet set correctly to be 16 bit
* Fixed FreeRTOS file header to comply with automatic checks
Co-authored-by: Cobus van Eeden <35851496+cobusve@users.noreply.github.com>
Critical sections in FreeRTOS are implemented using the following two
functions:
void vPortEnterCritical( void )
{
portDISABLE_INTERRUPTS();
uxCriticalNesting++;
}
void vPortExitCritical( void )
{
uxCriticalNesting--;
if( uxCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
uxCriticalNesting is initialized to a large value at the start and set
to zero when the scheduler is started (xPortStartScheduler). As a
result, before the scheduler is started, a pair of enter/exit critical
section will leave the interrupts disabled because uxCriticalNesting
will not reach zero in the vPortExitCritical function. This is done to
ensure that the interrupts remain disabled from the time first FreeRTOS
API is called to the time when the scheduler is started. The scheduler
starting code is expected to enure that interrupts are enabled before
the first task starts executing.
Cortex-M33 ports were not enabling interrupts before starting the first
task and as a result, the first task was started with interrupts
disabled. This PR fixes the issue by ensuring that interrupts are
enabled before the first task is started.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* Maintenance: Add readme.txt in each Renesas RX folder to show recomended port
* Update readme.txt in each Renesas RX folder regarding to Notes *1 and *2 (both are RX100 port)
* Style: fix some broken/redirect links
* Fix: atmel url
* Fix microchip typo
* Fix url links
* Fix shortcut link
* Comment: fix line wrapping
* Style: fix line wrapping to 80 chars
* Add now microchip beside Atmel
* Fix link in History
* Add Now Microchip before Atmel link
* Comment: add *
* Change vPortSetupTimerInterrupt in order to have 64bits access on rv64
* Support RV32E - RISC-V architecture (GCC)
Signed-off-by: Emmanuel Puerto <emmanuel.puerto@sifive.com>
* Support FPU - RISC-V architecture (GCC)
Signed-off-by: Emmanuel Puerto <emmanuel.puerto@sifive.com>
* Fix interrupt managment and FPU initialization
* Add RX200 GCC compiler
Signed-off-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Update GCC compiler for:
* RX600v2
* RX600
* RX100
Signed-off-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Use configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H flag
* Use configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H flag RX100, RX200
Co-authored-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Style: make freertos.org = FreeRTOS.org also add https
* Style: Fix freertos into FreeRTOS
* Style: Fix freertos into FreeRTOS
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
* Style: Change FreeRTOS websites in comments
* Style: Change freertos to FreeRTOS in comments
* Style: Remove broken link
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
