wasm-micro-runtime/samples/littlevgl

Introduction

This sample demonstrates that a graphic user interface application in WebAssembly integrates the LittlevGL, an open-source embedded 2d graphic library.

In this sample, the whole LittlevGL source code is built into the WebAssembly code with the user application. The platform interfaces defined by LittlevGL is implemented in the runtime and exported to the application through the declarations from source "ext_lib_export.c" as below:

    EXPORT_WASM_API(display_init),
    EXPORT_WASM_API(display_input_read),
    EXPORT_WASM_API(display_flush),
    EXPORT_WASM_API(display_fill),
    EXPORT_WASM_API(display_vdb_write),
    EXPORT_WASM_API(display_map),
    EXPORT_WASM_API(time_get_ms), };

The runtime component supports building target for Linux and Zephyr/STM Nucleo board. The beauty of this sample is the WebAssembly application can have identical display and behavior when running from both runtime environments. That implies we can do majority of application validation from desktop environment as long as two runtime distributions support the same set of application interface.

The sample also provides the native Linux version of application without the runtime under folder "vgl-native-ui-app". It can help to check differences between the implementations in native and WebAssembly.

The number on top will plus one each second, and the number on the bottom will plus one when clicked.

Install required SDK and libraries

• 32 bit SDL(simple directmedia layer) Use apt-get
  sudo apt-get install libsdl2-dev:i386
  Or download source from www.libsdl.org
  ./configure C_FLAGS=-m32 CXX_FLAGS=-m32 LD_FLAGS=-m32
make
sudo make install
  
• Install EMSDK

    https://emscripten.org/docs/tools_reference/emsdk.html

Build and Run

Linux

• Build
  ./build.sh
  All binaries are in "out", which contains "host_tool", "vgl_native_ui_app", "TestApplet1.wasm" and "vgl_wasm_runtime".

• Run native Linux application
  ./vgl_native_ui_app
  

• Run WASM VM Linux applicaton & install WASM APP
  First start vgl_wasm_runtime in server mode.
  ./vgl_wasm_runtime -s
  Then install wasm APP use host tool.
  ./host_tool -i ui_app -f ui_app.wasm
  

Zephyr

WASM VM and native extension method can be built into Zephyr, Then we can install wasm app into STM32.

• Build WASM VM into Zephyr system
  a. clone zephyr source code
  git clone https://github.com/zephyrproject-rtos/zephyr.git
  b. copy samples
  cd zephyr/samples/
cp -a <iwasm_root_dir>samples/littlevgl/vgl-wasm-runtime vgl-wasm-runtime
cd vgl-wasm-runtime/zephyr_build
  c. create a link to wamr core
  ln -s <iwasm_root_dir>/core core
  d. build source code
  Since ui_app incorporated LittlevGL source code, so it needs more RAM on the device to install the application. It is recommended that RAM SIZE greater than 512KB. In our test use nucleo_f767zi, which is not supported by Zephyr. However, nucleo_f767zi is almost the same as nucleo_f746zg, except FLASH and SRAM size. So we changed the DTS setting of nucleo_f746zg boards for a workaround.
  

  Modify zephyr/dts/arm/st/f7/stm32f746xg.dtsi, change DT_SIZE_K(320) to DT_SIZE_K(512)
mkdir build && cd build
source ../../../../zephyr-env.sh
cmake -GNinja -DBOARD=nucleo_f746zg ..
ninja flash
  

• Test on STM32 NUCLEO_F767ZI with ILI9341 Display with XPT2046 touch
  Hardware Connections

+-------------------+-+------------------+
|NUCLEO-F767ZI || ILI9341  Display |
+-------------------+-+------------------+
| CN7.10               |         CLK     |
+-------------------+-+------------------+
| CN7.12               |         MISO    |
+-------------------+-+------------------+
| CN7.14               |         MOSI    |
+-------------------+-+------------------+
| CN11.1               | CS1 for ILI9341 |
+-------------------+-+------------------+
| CN11.2               |         D/C     |
+-------------------+-+------------------+
| CN11.3               |         RESET   |
+-------------------+-+------------------+
| CN9.25               |    PEN interrupt|
+-------------------+-+------------------+
| CN9.27               | CS2 for XPT2046 |
+-------------------+-+------------------+
| CN10.14             | PC UART RX       |
+-------------------+-+------------------+
| CN11.16             | PC UART RX       |
+-------------------+-+------------------+

• Install WASM application to Zephyr using host_tool
  First, connect PC and STM32 with UART. Then install to use host_tool.
  ./host_tool -D /dev/ttyUSBXXX -i ui_app -f ui_app.wasm