.. | ||
bl702_dualuart_whole_img.bin | ||
flash_download.png | ||
README.md | ||
rv-debugger.png |
Bouffalo DualUart
This is the instructions for the dualuart firmware used with BL702 or BL616.
Hardware
Sipeed RV-Debugger-Plus
- Use BL702C-A0
Flash download (via BLDevCube)
- Open BL Devcube
- Select IOT UI and select single download
- Load firmware
- Press and hold the boot pin then plug the usb in the computer to go to the boot mode.
- Download
Flash download (via blisp)
- Download latest blisp here.
- Press and hold the boot pin then plug the usb in the computer to go to the boot mode.
- Execute
blisp iot -c bl70x --reset -s bl702_dualuart_whole_img.bin -l 0x0
UART PIN
DTR and RTS are only used for downloading with devcube.
Function | Label | GPIO |
---|---|---|
UART0 TX | TCK | GPIO15 |
UART0 RX | TDI | GPIO0 |
UART0 DTR | TMS | GPIO2 |
UART0 RTS | TDO | GPIO1 |
UART1 TX | TX | GPIO26 |
UART1 RX | RX | GPIO27 |
UART1 DTR | DTR | GPIO28 |
UART1 RTS | RTS | GPIO24 |