* Add RX200 GCC compiler
Signed-off-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Update GCC compiler for:
* RX600v2
* RX600
* RX100
Signed-off-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Use configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H flag
* Use configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H flag RX100, RX200
Co-authored-by: Dinh Van Nam <vannam.dinh.xt@renesas.com>
* Style: make freertos.org = FreeRTOS.org also add https
* Style: Fix freertos into FreeRTOS
* Style: Fix freertos into FreeRTOS
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
* Style: Change FreeRTOS websites in comments
* Style: Change freertos to FreeRTOS in comments
* Style: Remove broken link
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
* Removing StackMacros.h
* Moving 4 Function Prototypes out of the C files into the headers
* Revert "Removing StackMacros.h"
This reverts commit cdd8307817048c794d038588aa00833b0532401b.
Add necessary checks when sending data to the stream/message buffer in order to avoid a task deadlock when attempting to write a longer stream/message than the underlying buffer can write.
* Update port.c
I discovered a very snicky and tricky race condition scenario when integrating tracealyzer code into our project.
A little background on CortexR5 : When the IRQ line (comming from the interrupt controller, to which every peripheral IRQ lines connect) of the processor rises and the IRQ Enable bit in the status register of the CPU permits it, the CPU traps into interrupt mode. Several things happen. First, the CPU finishes the instruction it was performing. Second, it places the content of the CPSR register into the SPSR_irq register. And third, the mode of the CPU is changed to IRQ_Mode and /!\ THE IRQ ENABLE BIT IN CPSR_irq IS AUTOMATICALLY CLEARED /!\. The reason is to ensure that upon landing into IRQ code, we find ourselves automatically in a critical section because we cannot be interrupted again because the bit is cleared. The programmer can, if he wants, re-enable IRQs inside IRQ code itself to allow interrupt nesting. But it has to be wanted and meditated.
Now, inside portASM.S, at the end of 'FreeRTOS_IRQ_Handler' assembly function, a call to 'vTaskSwitchContextConst' is made if the variable 'ulPortYieldRequired' was set by someone while executing the interrupt. Before branching to that function, a 'CPSID i' instruction was placed to ensure that interrupts are disabled in case someone re-enabled it. Inside 'vTaskSwitchContext', there is the macro 'traceTASK_SWITCHED_OUT' that gets populated when tracing is enabled.
The bug is right there.. If the macro is populated and inside that macro there is a matching call to 'ulPortSetInterruptMask' and 'vPortClearInterruptMask', a race condition can occure is there is a OS Tick timer interrupt waiting at the interrupt controller's door. Upon calling 'vTaskSwitchContext', the interrupts are not masked in the interrupt controller, the only barrier against the CPU servicing that tick interrupt while already performing the function is that the IRQ Enable bit cleared. 'ulPortSetInterruptMask'
does what's its supposed to do, but doesn't take into account the IRQ Enable bit in CPSR. Wheter or not the bit was cleared, the function sets it at the end. When calling the matching 'vPortClearInterruptMask', the function clears the interrupt mask in the interrupt controller. Because the IRQ Enable bit (that was cleared) has been set no matter what in 'ulPortSetInterruptMask', the CPU services the OS Tick Interrupt right away.
The bug is there : instead of completing the 'vTaskSwitchContext' function, the CPU re-enters the switch context path right after 'traceTASK_SWITCHED_OUT' thus corrupting the CPU state and eventually triggering either an undefined instruction, data or instruction abort.
* Update port.c
Error on my part, this is the right inline asm code to retreive CPSR register
* Update port.c
Forgot an * while writing comment..
ulTaskGenericNotifyValueClear() returned the notification value of the
currently running task, not the target task. Now it returns the
notification value of the target task.
Some users expected xTaskCheckForTimeOut() to clear the 'last wake time'
value each time a timeout occurred, whereas it only did that in one path.
It now clears the last wake time in all paths that return that a timeout
occurred.
The TEX, Shareable (S), Cacheable (C) and Bufferable (B) bits define
the memory type, and where necessary the cacheable and shareable
properties of the memory region.
The default values for these bits, as configured in our MPU ports, are
sometimes not suitable for application. One such example is when the MCU
has a cache, the application writer may not want to mark the memory as
shareable to avoid disabling the cache. This change allows the
application writer to override default vales for TEX, S C and B bits for
Flash and RAM in their FreeRTOSConfig.h. The following two new
configurations are introduced:
- configTEX_S_C_B_FLASH
- configTEX_S_C_B_SRAM
If undefined, the default values for the above configurations are
TEX=000, S=1, C=1, B=1. This ensures backward compatibility.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* Removed TICK_stop() macro from portable/GCC/{AVR_AVRDx, AVR_Mega0}/porthardware.h because it is not used anywhere.
* Updated indentation in portable/GCC/{AVR_AVRDx, AVR_Mega0}/* files.
* Added portable/IAR/{AVR_AVRDx, AVR_Mega0 folders.
The expected behaviour of portIS_PRIVILEGED is:
- return 0 if the processor is not running privileged.
- return 1 if the processor is running privileged.
Some TI ports do not return 1 when the processor is running privileged
causing the following check to fail: if( xRunningPrivileged != pdTRUE )
This commit change the check to: if( xRunningPrivileged == pdFALSE ). It
ensures that the check is successful even on the ports which return incorrect
value from portIS_PRIVILEGED when the processor is running privileged.
See https://forums.freertos.org/t/kernel-bug-nested-mpu-wrapper-calls-generate-an-exception/10391
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
configSYSTICK_CLOCK_HZ should be used to configure SysTick to support
the use case when the clock for SysTick timer is scaled from the main
CPU clock.
configSYSTICK_CLOCK_HZ is defined to configCPU_CLOCK_HZ when it is not
defined in FreeRTOSConfig.h.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
ARMv7-M supports 8 or 16 MPU regions. FreeRTOS Cortex-M4 MPU ports so
far assumed 8 regions. This change adds support for 16 MPU regions. The
hardware with 16 MPU regions must define configTOTAL_MPU_REGIONS to 16
in their FreeRTOSConfig.h.
If left undefined, it defaults to 8 for backward compatibility.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Update BSP APIs to latest version
Remove unused macro which could have caused warnings
(Code Style) Manually align some macros
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
These definitions were not useful because the corresponding mapping was
removed from mpu_wrappers.h earlier.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
The reason for the change is that the register is called System Handler
Priority Register 3 (SHPR3).
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Some of the privileged symbols were not being placed in their respective
sections. This commit addresses those and places them in
privileged_functions or privileged_data section.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
If xTaskCreate API is used to create a task, the task's stack is
allocated on heap using pvPortMalloc. This places the task's stack
in the privileged data section, if the heap is placed in the
privileged data section.
We use a separate MPU region to grant a task access to its stack.
If the task's stack is in the privileged data section, this results in
overlapping MPU regions as privileged data section is already protected
using a separate MPU region. ARMv8-M does not allow overlapping MPU
regions and this results in a fault. This commit ensures to not use a
separate MPU region for the task's stack if it lies within the
privileged data section.
Note that if the heap memory is placed in the privileged data section,
the xTaskCreate API cannot be used to create an unprivileged task as
the task's stack will be in the privileged data section and the task
won't have access to it. xTaskCreateRestricted and
xTaskCreateRestrictedStatic API should be used to create unprivileged
tasks.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* Added protection for xQueueGenericCreate
* prevent eventual invalid state change from int8 overflow
* Append period at end of comment. To be consistent with file.
* check operand, not destination
* parantheses -- to not show assumptive precendence
* Per request, less dependence on stdint by defining and checking against queueINT8_MAX instead
When Link Time Optimization (LTO) is enabled, some of the LDR
instructions result in out of range access. The reason is that the
default generated literal pool is too far and not within the permissible
range of 4K.
This commit adds LTORG assembly instructions at required places to
ensure that access to literals remain in the permissible range of 4K.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
* * Renamed trace point in prvNotifyQueueSetContainer() so it isn't a duplicate of the trace point in xQueueGenericSend()
* * Fixed backwards compatibility.
Co-authored-by: Erik Tamlin <erik.tamlin@percepio.com>
Refer to https://www.freertos.org/a00133.html.
The issue with the implementation is that, if only stop kernel tick the program will keep executing current task.
The desired behavior is to at least return/jump to the next instruction after vTaskStartScheduler().
Signed-off-by: Yuhui Zheng <10982575+yuhui-zheng@users.noreply.github.com>
Description
Before this change each task had a single direct to task notification value and state as described here: https://www.FreeRTOS.org/RTOS-task-notifications.html. After this change each task has an array of task notifications, so more than one task notification value and state per task. The new FreeRTOSConfig.h compile time constant configTASK_NOTIFICATION_ARRAY_ENTRIES sets the number of indexes in the array.
Each notification within the array operates independently - a task can only block on one notification within the array at a time and will not be unblocked by a notification sent to any other array index.
Task notifications were introduced as a light weight method for peripheral drivers to pass data and events to tasks without the need for an intermediary object such as a semaphore - for example, to unblock a task from an ISR when the operation of a peripheral completed. That use case only requires a single notification value. Their popularity and resultant expanded use cases have since made the single value a limitation - especially as FreeRTOS stream and message buffers themselves use the notification mechanism. This change resolves that limitation. Stream and message buffers still use the task notification at array index 0, but now application writers can avoid any conflict that might have with their own use of task notifications by using notifications at array indexes other than 0.
The pre-existing task notification API functions work in a backward compatible way by always using the task notification at array index 0. For each such function there is now an equivalent that is postfixed "Indexed" and takes an additional parameter to specify which index within the array it should operate upon. For example, xTaskNotify() is the original that only operates on array index 0. xTaskNotifyIndexed() is the new function that can operate on any array index.
Test Steps
The update is tested using the Win32 demo (PR to be created in the FreeRTOS/FreeRTOS github repo), which has been updated to build and run a new test file FreeRTOS/Demo/Common/Minimal/TaskNotifyArray.c. The tests in that file are in addition to, not a replacement for those in FreeRTOS/Demo/Common/Minimal/TaskNotify.c.
By submitting this pull request, I confirm that you can use, modify, copy, and redistribute this contribution, under the terms of your choice.
