* Use cast to fix warnings.
* Remove all empty definitions of portCLEAN_UP_TCB( pxTCB ) and
portALLOCATE_SECURE_CONTEXT( ulSecureStackSize ) from ports.
When these are undefined, the default empty definition is defined
in FreeRTOS.h.
event_wait_timed() was ignoring a timeout of 1000 ms.
Presumably this is because pthread_cond_timedwait() only
considers tv_nsec less than one second.
Convert the timeout in miliseconds to second and nanosecond
components to fix this.
Co-authored-by: alfred gedeon <28123637+alfred2g@users.noreply.github.com>
* Revert "Reintroduce Espressif's IDF v4.2 changes to ESP32 port (#193)"
This reverts commit 3d4d17178f.
* Update ESP32 port files to work with ESP-IDF v4.2 as well as ESP-IDF v3.3
Add changes required to support ESP32-S2
* portmacro.h: Change return type of vApplicationSleep to void
This fixes build failure when automatic light sleep is enabled
* prevent header checks for files with different licensing
Co-authored-by: David Chalco <david@chalco.io>
* Xtensa: fix the coproc_area incorrect issue
foss-xtensa/amazon-freertos#2 mentioned a issue:
1.
In function pxPortInitialiseStack(StackType_t *pxTopOfStack....)
p = (uint32_t *)(((uint32_t) pxTopOfStack - XT_CP_SIZE) & ~0xf);
In function prvInitialiseNewTask (file: task.c)
pxTopOfStack = (pxStack + (ulStackDepth - 1)) & (~portBYTE_ALIGNMENT_MASK)
So the co-processor area is at
p = (uint32_t *)(((uint32_t)((pxStack + (ulStackDepth - 1)) & (~portBYTE_ALIGNMENT_MASK)) - XT_CP_SIZE) & ~0xf);
2.
In function vPortStoreTaskMPUSettings( .... , StackType_t pxBottomOfStack ...)
xMPUSettings->coproc_area = (StackType_t)((((uint32_t)(pxBottomOfStack + usStackDepth - 1)) - XT_CP_SIZE) & ~0xf);
pxBottomOfStack = pxStack
=> xMPUSettings->coproc_area = (StackType_t*)((((uint32_t)(pxStack+ ulStackDepth - 1)) - XT_CP_SIZE ) & ~0xf);
The p is coproc_area that should be equal to xMPUSettings->coproc_area.
For example, assume pxStack is 0xa0000000, ulStackDepth is 0x2000,
portBYTE_ALIGNMENT_MASK is 0x7f, XT_CP_SIZE is 0x100.
The p = (uint32_t)(((uint32_t)((pxStack + (ulStackDepth - 1)) & (~portBYTE_ALIGNMENT_MASK)) - XT_CP_SIZE) & ~0xf)
= 0xa0001e80
The xMPUSettings->coproc_area = (StackType_t)((((uint32_t)(pxStack+ usStackDepth - 1)) - XT_CP_SIZE ) & ~0xf)
= 0xa0001ef0
Obviously, the p is not equal to the xMPUSettings->coproc_area, which will cause context switching error.
Signed-off-by: magicse7en <magicse7en@outlook.com>
* Update port.c
Co-authored-by: Carl Lundin <53273776+lundinc2@users.noreply.github.com>
In function pxPortInitialiseStack of port.c:
sp = ( StackType_t * ) ( ( ( UBaseType_t ) ( pxTopOfStack + 1 ) - XT_CP_SIZE - XT_STK_FRMSZ ) & ~0xf );
We assume XT_CP_SIZE is 0xE4, XT_STK_FRMSZ is 0xA0, pxTopOfStack is 0xA0000000, sp is 0x9FFFFE80.
From port.c, we know the frame->a1 as below:
frame->a1 = ( UBaseType_t ) sp + XT_STK_FRMSZ; /* physical top of stack frame */
So frame->a1 is 0x9FFFFF20. Therefore the interrupt stack frame range is 0x9FFFFE80 ~ 0x9FFFFF20.
The coproc_area is: p = ( uint32_t * ) ( ( ( uint32_t ) pxTopOfStack - XT_CP_SIZE ) & ~0xf );
So its value is 0x9FFFFF10. Obviously, the interrupt stack frame overlaps the coproc_area.
Co-authored-by: Carl Lundin <53273776+lundinc2@users.noreply.github.com>
* Renamed old port to ESP_IDF_V3
* Update ESP32 port files to support IDF v4.2.
* Add changes required to support ESP32-S2
Co-authored-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
* Posix: Fix no task switching issue if a task ended
When the main function of a task exits, no task switching happened.
This is because all the remaining tasks are waiting on the condition
variable. The fix is to trigger a task switch and mark the exiting
task as "Dying" to be suspened and exited properly from the scheduler.
* Posix: Assert and stop if the Task function returned
* Posix: just assert if a task returned from its main function
Co-authored-by: alfred gedeon <alfred2g@hotmail.com>
* Posix: Free Idle task resources after ending the scheduler
In case of using Posix simulator and ending the scheduler, it does
not free the resources allocated by the idle task. This
causes the memory checkers (Valgrind, Address Sanitizers, ..) to
complain.
* Posix: Free the condition variable memory in the correct place
In case of deleting a task from another task, the deletion happens
immediately and the thread is canceled but the memory allocated by
the task condition variable is not freed. This causes the memory
checkers (Valgrind, Address sanitizers, ..) to complain.
* Posix: End Timer thread and free its resources after ending the scheduler
* Style: fix some broken/redirect links
* Fix: atmel url
* Fix microchip typo
* Fix url links
* Fix shortcut link
* Comment: fix line wrapping
* Style: fix line wrapping to 80 chars
* Add now microchip beside Atmel
* Fix link in History
* Add Now Microchip before Atmel link
* Comment: add *
* Synopsys Port: Adding support to Synopsys ARC v1 series cores
ARC v1 cores include ARC605, ARC610d, and ARC710d
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
* Synopsys ARC v1 port: run uncrustify to fix code style
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
* Synopsys port: modify license headers, change copyright only
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
* Style: make freertos.org = FreeRTOS.org also add https
* Style: Fix freertos into FreeRTOS
* Style: Fix freertos into FreeRTOS
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
* Style: Change FreeRTOS websites in comments
* Style: Change freertos to FreeRTOS in comments
* Style: Remove broken link
Co-authored-by: Alfred Gedeon <gedeonag@amazon.com>
Update BSP APIs to latest version
Remove unused macro which could have caused warnings
(Code Style) Manually align some macros
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
