Change occurrences of "Cortex M3" to "Cortex-M3".

Demo/CORTEX_AT91SAM3U256_IAR/system/exceptions.c

@@ -119,7 +119,7 @@ WEAK void PendSV_Handler(void)
 }
 
 //------------------------------------------------------------------------------
-// for Cortex M3
+// for Cortex-M3
 //------------------------------------------------------------------------------
 WEAK void SysTick_Handler(void)
 {

Demo/CORTEX_LM3S102_GCC/hw_include/hw_sysctl.h

@@ -114,7 +114,7 @@
 //
 //*****************************************************************************
 #define SYSCTL_DC1_SYSDIV_MASK  0x0000F000  // Minimum system divider mask
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present
 #define SYSCTL_DC1_SWO          0x00000004  // Serial wire output present

Demo/CORTEX_LM3S102_GCC/init/startup.c

@@ -55,7 +55,7 @@ static unsigned long pulMainStack[STACK_SIZE];
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LM3S102_Rowley/hw_include/hw_sysctl.h

@@ -114,7 +114,7 @@
 //
 //*****************************************************************************
 #define SYSCTL_DC1_SYSDIV_MASK  0x0000F000  // Minimum system divider mask
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present
 #define SYSCTL_DC1_SWO          0x00000004  // Serial wire output present

Demo/CORTEX_LM3S316_IAR/hw_include/hw_sysctl.h

@@ -128,7 +128,7 @@
 #define SYSCTL_DC1_ADCSPD_MASK  0x00000F00  // ADC speed mask
 #define SYSCTL_DC1_ADCSPD_250K  0x00000100  // 250Ksps ADC
 #define SYSCTL_DC1_ADCSPD_125K  0x00000000  // 125Ksps ADC
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_TEMP         0x00000020  // Temperature sensor present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present

Demo/CORTEX_LM3S316_IAR/hw_include/startup.c

@@ -83,7 +83,7 @@ uVectorEntry;
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LM3S316_IAR/hw_include/sysctl.h

@@ -60,7 +60,7 @@ extern "C"
 #define SYSCTL_PERIPH_GPIOC     0x20000004  // GPIO C
 #define SYSCTL_PERIPH_GPIOD     0x20000008  // GPIO D
 #define SYSCTL_PERIPH_GPIOE     0x20000010  // GPIO E
-#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
+#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex-M3 MPU
 #define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
 #define SYSCTL_PERIPH_PLL       0x30000010  // PLL
 

Demo/CORTEX_LM3S811_GCC/hw_include/hw_sysctl.h

@@ -146,7 +146,7 @@
 #define SYSCTL_DC1_ADCSPD_500K  0x00000200  // 500Ksps ADC
 #define SYSCTL_DC1_ADCSPD_250K  0x00000100  // 250Ksps ADC
 #define SYSCTL_DC1_ADCSPD_125K  0x00000000  // 125Ksps ADC
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_TEMP         0x00000020  // Temperature sensor present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present

Demo/CORTEX_LM3S811_GCC/hw_include/sysctl.h

@@ -61,7 +61,7 @@ extern "C"
 #define SYSCTL_PERIPH_GPIOC     0x20000004  // GPIO C
 #define SYSCTL_PERIPH_GPIOD     0x20000008  // GPIO D
 #define SYSCTL_PERIPH_GPIOE     0x20000010  // GPIO E
-#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
+#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex-M3 MPU
 #define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
 #define SYSCTL_PERIPH_PLL       0x30000010  // PLL
 

Demo/CORTEX_LM3S811_GCC/init/startup.c

@@ -59,7 +59,7 @@ static unsigned long pulStack[STACK_SIZE];
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LM3S811_IAR/LuminaryCode/hw_sysctl.h

@@ -146,7 +146,7 @@
 #define SYSCTL_DC1_ADCSPD_500K  0x00000200  // 500Ksps ADC
 #define SYSCTL_DC1_ADCSPD_250K  0x00000100  // 250Ksps ADC
 #define SYSCTL_DC1_ADCSPD_125K  0x00000000  // 125Ksps ADC
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_TEMP         0x00000020  // Temperature sensor present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present

Demo/CORTEX_LM3S811_IAR/LuminaryCode/sysctl.h

@@ -61,7 +61,7 @@ extern "C"
 #define SYSCTL_PERIPH_GPIOC     0x20000004  // GPIO C
 #define SYSCTL_PERIPH_GPIOD     0x20000008  // GPIO D
 #define SYSCTL_PERIPH_GPIOE     0x20000010  // GPIO E
-#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
+#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex-M3 MPU
 #define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
 #define SYSCTL_PERIPH_PLL       0x30000010  // PLL
 

Demo/CORTEX_LM3S811_IAR/startup.c

@@ -85,7 +85,7 @@ uVectorEntry;
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LM3S811_KEIL/LuminaryCode/hw_sysctl.h

@@ -146,7 +146,7 @@
 #define SYSCTL_DC1_ADCSPD_500K  0x00000200  // 500Ksps ADC
 #define SYSCTL_DC1_ADCSPD_250K  0x00000100  // 250Ksps ADC
 #define SYSCTL_DC1_ADCSPD_125K  0x00000000  // 125Ksps ADC
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_TEMP         0x00000020  // Temperature sensor present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present
 #define SYSCTL_DC1_WDOG         0x00000008  // Watchdog present

Demo/CORTEX_LM3S811_KEIL/LuminaryCode/src/sysctl.h

@@ -61,7 +61,7 @@ extern "C"
 #define SYSCTL_PERIPH_GPIOC     0x20000004  // GPIO C
 #define SYSCTL_PERIPH_GPIOD     0x20000008  // GPIO D
 #define SYSCTL_PERIPH_GPIOE     0x20000010  // GPIO E
-#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
+#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex-M3 MPU
 #define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
 #define SYSCTL_PERIPH_PLL       0x30000010  // PLL
 

Demo/CORTEX_LM3Sxxxx_Eclipse/RTOSDemo/startup.c

@@ -61,7 +61,7 @@ static unsigned long pulStack[STACK_SIZE];
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LM3Sxxxx_IAR_Keil/startup_ewarm.c

@@ -89,7 +89,7 @@ uVectorEntry;
 
 //*****************************************************************************
 //
-// The minimal vector table for a Cortex M3.  Note that the proper constructs
+// The minimal vector table for a Cortex-M3.  Note that the proper constructs
 // must be placed on this to ensure that it ends up at physical address
 // 0x0000.0000.
 //

Demo/CORTEX_LPC1768_GCC_RedSuite/src/FreeRTOSConfig.h

@@ -141,7 +141,7 @@ to exclude the API function. */
 /* Priorities passed to NVIC_SetPriority() do not require shifting as the
 function does the shifting itself.  Note these priorities need to be equal to
 or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric
-value needs to be equal to or greater than 5 (on the Cortex M3 the lower the
+value needs to be equal to or greater than 5 (on the Cortex-M3 the lower the
 numeric value the higher the interrupt priority). */
 #define configEMAC_INTERRUPT_PRIORITY		5
 #define configUSB_INTERRUPT_PRIORITY		6

Demo/CORTEX_LPC1768_GCC_Rowley/FreeRTOSConfig.h

@@ -141,7 +141,7 @@ to exclude the API function. */
 /* Priorities passed to NVIC_SetPriority() do not require shifting as the
 function does the shifting itself.  Note these priorities need to be equal to
 or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric
-value needs to be equal to or greater than 5 (on the Cortex M3 the lower the
+value needs to be equal to or greater than 5 (on the Cortex-M3 the lower the
 numeric value the higher the interrupt priority). */
 #define configEMAC_INTERRUPT_PRIORITY		5
 #define configUSB_INTERRUPT_PRIORITY		6

Demo/CORTEX_LPC1768_IAR/FreeRTOSConfig.h

@@ -139,7 +139,7 @@ to exclude the API function. */
 /* Priorities passed to NVIC_SetPriority() do not require shifting as the
 function does the shifting itself.  Note these priorities need to be equal to
 or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric
-value needs to be equal to or greater than 5 (on the Cortex M3 the lower the
+value needs to be equal to or greater than 5 (on the Cortex-M3 the lower the
 numeric value the higher the interrupt priority). */
 #define configEMAC_INTERRUPT_PRIORITY		5
 #define configUSB_INTERRUPT_PRIORITY		6

Demo/CORTEX_STM32F103_GCC_Rowley/main.c

@@ -75,7 +75,7 @@
  * file contains a simple repeating string of fixed width.
  *
  * Currently this demo does not include interrupt nesting examples.  High 
- * frequency timer and simpler nesting examples can be found in most Cortex M3
+ * frequency timer and simpler nesting examples can be found in most Cortex-M3
  * demo applications.
  *
  * The functions used to initialise, set and clear LED outputs are normally 

Demo/CORTEX_STM32F103_Primer_GCC/ST_Code/crt0_STM32x.c

@@ -100,7 +100,7 @@ extern void vPortSVCHandler( void );
 
 /******************************************************************************
 *
-* The minimal vector table for a Cortex M3.  Note that the proper constructs
+* The minimal vector table for a Cortex-M3.  Note that the proper constructs
 * must be placed on this to ensure that it ends up at physical address
 * 0x0000.0000.
 *

Demo/Common/drivers/LuminaryMicro/hw_sysctl.h

@@ -318,7 +318,7 @@
 #define SYSCTL_DC1_ADCSPD_250K  0x00000100  // 250Ksps ADC
 #define SYSCTL_DC1_ADCSPD_500K  0x00000200  // 500Ksps ADC
 #define SYSCTL_DC1_ADCSPD_1M    0x00000300  // 1Msps ADC
-#define SYSCTL_DC1_MPU          0x00000080  // Cortex M3 MPU present
+#define SYSCTL_DC1_MPU          0x00000080  // Cortex-M3 MPU present
 #define SYSCTL_DC1_HIB          0x00000040  // Hibernation module present
 #define SYSCTL_DC1_TEMP         0x00000020  // Temperature sensor present
 #define SYSCTL_DC1_PLL          0x00000010  // PLL present

Demo/Common/drivers/LuminaryMicro/sysctl.h

@@ -95,7 +95,7 @@ extern "C"
 #define SYSCTL_PERIPH_IEEE1588  0x20100100  // IEEE1588
 #define SYSCTL_PERIPH_PLL       0x30000010  // PLL
 #define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
-#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
+#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex-M3 MPU
 
 //*****************************************************************************
 //